Glen UnySupport FC
The extended time required to cleave the succinate linkage of the original Glen UnySupport can be problematical, especially in high-throughput production of oligos, due to the outgassing of ammonia and/or methylamine. This reduction in concentration of gas can necessitate the evaporation of the cleavage solution and addition of fresh Ammonium Hydroxide:MethylAmine 1:1 (AMA) or ammonium hydroxide (NH4OH) to ensure complete deprotection and dephosphorylation of the product oligos. Using a diglycolate linkage in Glen UnySupport FC instead of the succinate in Glen UnySupport, a significant increase in the rate of cleavage has been achieved. The minimum cleavage times for both versions are as follows:
|Glen UnySupport FC
With the cleavage time of Glen UnySupport FC reduced to less than 5 minutes, there is minimal loss of volatile gas and, therefore, no need to evaporate the cleavage solution and replenish with fresh AMA or ammonium hydroxide solutions.
We offer Glen UnySupport FC attached to 1000Å CPG in a variety of formats suited to high throughput synthesis, as well as in bulk for more routine use.
Coupling: This support should be used in a manner identical to normal protected nucleoside support since it contains the DMT group.
Deprotection: Solution phase: Ammonium Hydroxide:MethylAmine (AMA) 1:1 for 1 hour at 65°C or Ammonium Hydroxide for 8 hours at 55°C. For sensitive minor bases or dyes, Glen UnySupport may be eliminated with 50 mM Potassium Carbonate in Methanol in 17 hours at room temperature or with Tert-Butylamine/water 1:3 (v/v) for 4 hours at 60°C. Gas Phase: Methylamine gas for 30 minutes at 65°C at 30 psi. Oligonucleotide is cleaved from the support in 2 minutes (AMA) or 5 minutes (NH4OH) at room temperature.
Storage: Storage: Storage: Controlled room temperature or lower, dry
Please Note: This product is covered by US Patent 7,202,264 owned by Ionis Pharmaceuticals, Inc..
Non-Catalog Item. Please contact customer service for pricing and availability.
If you cannot find the answer to your problem below then please
contact us or telephone 01954 210 200